General Problems of Printing (Continued)
●
Enough disk space is not available
An error message will appear at the top-left icon on the touch screen when available disk space of this print-
ing system becomes less than 3% of total disk capacity.
Solution:
1.
Press the [MODE] button to open the printer mode basic screen.
(p.475) Switching Between Modes
Reference
2.
Make sure the [HD free space] displayed at the red circle on the upper
screen.
If [HD free space] is not full, the disk space of the hard disk in the copier may be full.
Refer to the copier's manual for more detailed information.
3.
Delete scan jobs saved on the hard disk in this printing system from
the computer on the network.
Refer to "Setting the ScanDataAutoDel." for specific procedures on deleting scanned data.
(p.492) Setting the ScanDataAutoDel.
Reference
4.
Print confidential output print jobs (password print) stored on the hard
disk in the printing system from the control panel.
5.
The automatic timer capability in this printing system deletes print
jobs stored on the hard disk in the system automatically after 24 hours
of storing.
428
Chapter 9 Troubleshooting