Kyocera KM-8530 User Manual page 177

To set the Bypass tray (Manual feed) (Continued)
●
Operating procedures of
Limitation
[Tray 4] cannot be set in the following case:
• When [LT-402 Large Capacity Tray] or [LT-412 Large Capacity Tray] is not available in
[Setup] tab
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of the message and adjust the relationship with
other settings.
1.
Open [Paper] tab of [Properties] window.
When displayed from an application with Windows 98.
The default is [Auto Select]. When [Auto Select] is set, a tray set with paper specified in [Properties] of this printing
system is automatically selected from an application.
2.
Click the [▼] button beside the [Paper Source] box to display the list.
Then select a tray you want to use from the list.
3.
Click the [OK] button to close the [Properties] window.
PCL5e
177
Chapter 5 Printing from Windows