Kyocera KM-8530 User Manual page 355

To set the Manual Feed Tray (Continued)
●
Operating procedures of
Limitation
[Tray 4] cannot be set in the following cases:
• When [Off] is selected for the [Configure] - [Large Capacity Tray].
Also, when setting a Feed Tray, take note of the following:
• When using [B6] or be sure to select [Manual Feed].
• When selecting [OHP -Interleave(Blank)] or [OHP -Interleave(Print)] for the [Media Type] in
the [Printer Specific Options] dialog box (2), select a tray from among [Tray 1] / [Tray 2] /
[Tray 3] / [Tray 4]. When selecting any other than the above, be sure to select [Manual
Feed].
1.
Open [Print] - [General].
2.
Click the [All pages from] or [First page from] button in the [Paper
Source] box.
3.
Click the [▼] button beside the [All pages from] or [First page from]
button to select a tray you want to use from the list.
•
The default is [Auto Select]. When [Auto Select] is set, a tray set with paper specified in [Property] of this print-
ing system is automatically selected from the application.
•
If [Tray 4] is not recognized as a Large Capacity Tray, it is not shown in the list.
(p.353) To set the Large Capacity Tray
Reference
4.
Click the [Print] button to print now.
Click the [Save Settings] button to save the setting as the default.
Adobe PS3
355
Chapter 6 Printing from Macintosh