Kyocera KM-8530 User Manual page 427

General Problems of Printing (Continued)
●
The print setting of a job does not correspond to the result of printing.
1.
Check that the printer setting was not changed.
Refer to "Appendix B Function List" for the printer setting.
(p.595) Function List (Print Controller)
Reference
●
Memory Overflow
1.
Depending on the functions selected in the printer driver, occasional
memory overflow may occur if the volume of the print job is large. In
this case the print job is cancelled.
e.g., Booklet, Fold & Stitch, 2 in 1, etc.
In case of frequent Memory Overflow we recommend that you extend the memory capacity in the
main body printer (copier).
When "Print Controller Memory Overflow" is displayed on the LCD Touch Screen when you are using
Duplex printing or another Application function, you may cancel the print job and try to reprint with
another function.
427
Chapter 9 Troubleshooting