Kyocera KM-8530 User Manual page 377

To set a Front Cover (Continued)
●
Operating procedures of
Limitation
[Front Cover] cannot be set in the following cases:
• When [OHP-Interleave(Blank)] or [OHP-Interleave(Print)] is selected for [Media Type] in the
[Print] - [Printer Specific Options] dialog box (1).
• When [Group] is selected for [Collate] in the [Print] - [Printer Specific Options].
• When [2-in-1] or [2-in-1 Repeat] is selected for [Combination] in the [Print] - [Printer Specific
Options].
1.
Open [Print] - [Printer Specific Options].
2.
Click the [▼] button beside the [Front Cover] to select [Blank] or
[Printed] from the list.
When [Blank] is selected, nothing is printed on the Front Cover.
When [Printed] is selected, the Front Cover is printed.
The default is [None].
3.
Click the [▼] button beside the [Front Cover Tray] box to select a tray
to feed a paper for the Front Cover from the list.
The default is [None].
4.
Click the [Print] button to print now.
Click the [Save Settings] button to save the setting as the default.
Adobe PS3
377
Chapter 6 Printing from Macintosh