Kyocera KM-8530 User Manual page 412

To test print to check the settings (Continued)
4.
The [Printer Check Mode] will appear on the LCD touch screen and no
printing is performed.
5.
Confirm the current settings.
6.
Change setting values of [Print Quantity], [Duplex Mode] or [Image
Shift], if necessary.
• How to change [Print Quantity]
Enter the value from the keypad on the control panel when the [Printer Check Mode Screen]
appears.
• How to change [Printer Mode
To show the [Basic Screen], touch the [Printer Mode]. Set the [Printer Mode] on the [Basic Screen].
To return to the [Printer Check Mode Screen], press the [CHECK] button on the control panel.
• How to change [Image Shift]
Available only when [On] is selected in [Image Shift] of printer driver.
To show the [Image Shift Screen], touch the [Image Shift]. Set the [Image Shift] on the [Image Shift
Screen]. To return to the [Printer Check Mode Screen], touch [EXIT] on the [Image Shift Screen].
7.
Touch the [PROOF PRINT] to print one copied set for proofreading.
8.
Touch the [EXIT] to return to the print mode basic screen.
9.
Press [START] to resume the rest of the print job.
When you change the settings, press [STOP] to cancel the print job, and change the settings on the
printer properties on your computer.
Chapter 6 Printing from Macintosh
412