Kyocera KM-8530 User Manual page 219

To set a Front Cover (Continued)
●
Operating procedures of
Limitation
[Front Cover] cannot be set in the following cases:
• When [OHP-Interleave(Blank)] or [OHP-Interleave(Print)] is selected in [Paper] tab - [Media
Type]
• When [Collate] is not available in [Paper] tab
• When [2-in-1] is selected in [Paper] tab - [Features] - [Combination]
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of the message and adjust the relationship with
other settings.
1.
Open [Cover] tab of [Properties] window.
When displayed from an application with Windows 98.
2.
Turn on the [Front Cover] check box.
3.
Click on the button for [Blank] or [Printed].
When [Blank] is turned on, nothing is printed on the front cover.
When [Printed] is turned on, the front cover is also printed.
The default is [Blank].
4.
Click the [▼] button beside the [Tray] box to select a tray that feeds a
paper for the front cover.
The default is [Tray 1].
5.
Click the [OK] button to close the [Properties] window.
PCL5e
219
Chapter 5 Printing from Windows