Setting The Scandataautodel - Kyocera KM-8530 User Manual

Setting the ScanDataAutoDel.

You can set the time period for saving scanned data before the printing system deletes it automatically from the
control panel.
The printing system deletes the scanned data automatically when it reaches the time out value.
If you set the ScanDataAutoDel setting to other than [OFF], you can reserve the free space in the internal hard disk
automatically.
1.
Press the [Mode] button, displays the [Printer Mode Basic] Screen.
The [Printer Mode Basic] screen will appear.
2.
Touch the [Controller Set] key.
The [Controller Set] screen will appear.
Touch [▲] key and [▼] key to display the previous screen and the following screen of the [Controller Set] screen
respectively.
3.
Touch the [ScanDataAutoDel.] key, and then touch the [OK] key.
The [ScanDataAutoDel. Set] screen will appear.
4.
Touch the key for the value that you want to set.
Chapter 16 Configuration of Printer Setting Menu
492