Downloading New Fonts - Kyocera KM-8530 User Manual

Downloading New Fonts

Important
• When downloading fonts, you need to set [Controller Set]-[Spool] to [Off] in Printer Menu
Screen on the copier control panel.
• For details on the menu structure of the copier control panel as well as on how to access
Printer Menu Screen, refer to the "Print Controller User's Guide," Chapter 15 Control Panel.
• Select [disk0] when downloading fonts onto the hard disk in the Print Controller.
• Downloaded to [disk1], the fonts are not available for use.
• Downloading fonts to [disk1] might result in the Print Controller not functioning dependably.
After having downloaded fonts, turn the copier off, wait 10 seconds at least, then turn it back
on. If you don't do so, you cannot use the downloaded fonts dependably.
For details on how to download fonts, refer to the User's Guide that comes with the fonts.
620
Appendix C Font