Kyocera KM-8530 User Manual page 279

To print a Watermark (Continued)
7.
In the [Font] field, click the [▼] button next to the [Color] box. Select
font colors to use for watermarks from the list shown.
Select [Black], [Dark Gray], [Light Gray], or [White].
8.
In the [Font] field, you can specify the density of the font color by drag-
ging the slider bar of the [Darkness] box.
9.
In the [Font] field, select a font size by directly entering the font size in
the [Size] box or by clicking the [▲] or [▼] button next to the [Size] box.
10.
Check the [Bold] or [Italic] Check box in the [Font] field to specify bold
or italic formatting.
11.
You can specify the watermark position in the [Position] field. Click the
[User Defined] button on to define X axis position (left and right) in the
[X] box, and Y axis position (up and down) in the [Y] box.
Click the [Automatically] button on to position the watermark automatically at the center of the page.
12.
Specify the lean angle of the watermark by dragging the slider bar of
the [Angle] box in the [Position] field or by directly entering the angle.
13.
To adjust the watermark manually in the preview window, click the
[Move] button on in the [Adjustment] field and drag to move the mark
around or click the [Rotate] button on and drag to rotate the mark
around.
14.
Click the [OK] button to close the [Properties] window.
15.
Print from the application.
When [Duplex] is executed with the odd number of pages, a blank paper is added. The blank paper is also printed
with a watermark.
Chapter 5 Printing from Windows
279