Chapter 11 Configuring Destination/Storage Location Settings; Scan To Hdd - Kyocera KM-8530 User Manual

Chapter Configuring 11 Destination/Storage Location Settings

Scan to HDD

When storing scanned data on the hard disk of the print controller, follow the next steps to register the desti-
nation hard disk.
1.
2.
3.
Press the [MODE] button on the control panel to display the [Scanner/
Server Basic] screen.
Up to 48 can be registered.
Touch the [SCAN] key on the [Scanner/Server Basic] screen.
The [Please select transmission object] screen will appear.
When the [Scanner/Server Basic] screen appears, the [E-mail] screen will appear first.
Choose the [HDD] key on the [Please select transmission object]
screen.
If the storage location (HDD) is already registered, the entry name will appear.
•
To deselect a destination/storage location you have selected, touch the selected destination/storage location
key again.
•
To change or delete registered Destinations/Storage Locations, use the Key Operator mode or the WWW
Server Function of the copier. For more detailed information, refer to the "Copier's User's Manual."
Chapter 11 Configuring Destination/Storage Loca-
436
Chapter
11
tion Settings