To Set To Print On Both Sides - Kyocera KM-8530 User Manual

To set to print on both sides

compliant
Adobe PS3
Print continuous multiple pages on both front and back sides. [Flip on long edge] and [Flip on short edge] are
available.
Flip on
long edge
●
Operating procedures of
Limitation
[Print on Both Sides] cannot be set in the following cases:
• When [B6], [Post card] or [Custom] is selected for [Paper] in the [Page Setup...].
• When [OHP], [OHP-Interleave(Blank)], [OHP-Interleave(Print)], [Trace] or [
• Sheet] is selected for [Media Type] in the [Print] - [Printer Specific Options] dialog box (1).
• When [Group] is selected for [Collate] in the [Print] - [Printer Specific Options].
• When [Booklet] or [Booklet-Right] is selected for [Combination] in the [Print] - [Printer Spe-
cific Options].
1.
Open [Print] - [Layout].
2.
Turn on the [Print on Both Sides] check box.
3.
Select [Flip on long edge] (the left button) or [Flip on short edge] (the
right button) from the [Binding] box.
The default is [Flip on long side] (the left button).
4.
Click the [Print] button to print now.
Click the [Save Settings] button to save the setting as the default.
Flip on
short edge
Adobe PS3
367
Chapter 6 Printing from Macintosh