Scanning (Continued)
Scan to FTP
Choose a destination from the displayed listing. You can select only one [FTP] destination.
If there are no destinations registered, you need to manually enter necessary destinations at this
stage. Touching the [Address manual input] key opens the [Transmission Address Input] screen
(FTP) at which you can enter the host address and other information about the FTP server.
(p.441) Setting of Destinations (FTP)
Reference
Touching the [SEARCH] key opens the [Search Letter Input] screen at which you can enter the first
letter of a registered destination for search. When the search result is displayed, the [SEARCH] key
is highlighted in reverse image. At this stage, you can touch the [ALL ITEM] key to display all regis-
tered names.
Touching the [CANCEL] key brings you back to the [Scanner/Server Basic] screen without regis-
tered your settings.
Touching the [OK] key saves your settings and opens the [Scanner Setting Basic] screen.
5.
After specifying storage locations/destinations, touch the [OK] key.
The [Scanner Setting Basic] screen opens. If necessary, go to the [Special Original Selection] screen
or the [Application Selection] screen to configure the setting details.
(p.450) Scanner Basic screen
Reference
(p.454) Special Original
Reference
(p.456) Application
Reference
Chapter 12 Scanner Operation
448