Kyocera KM-8530 User Manual page 526

Setups on the Control Panel (Continued)
6.
Wait at least 10 seconds and turn the copier back on.
There are occasions when the print controller malfunctions if you recycle the copier's main
power quickly. There are occasions when the Network Interface card malfunctions if you don't
recycle the copier's main power.
●
Unit Info
Shows information about the Network Interface Card's [ROM Version], [Serial Number] and [Ethernet
Address].
●
Update NIC
Updates the Network Interface Card with your settings.
●
Startup Page
Allows you to configure settings to get a network settings list or Status Page printed out.
Print on Startup
Lets you set whether you want to get Status Page printed out each time the copier is powered up. The
default is [YES].
Interpreter
Lets you select the interpreter from [ASCII] and [PostScript]. The default is [ASCII].
526
Chapter 19 Copier Setup