Kyocera KM-8530 User Manual page 580

UNIX Printing through TCP/IP (Continued)
Setting Up System V Release 4 and Solaris 2.X to Use lpd
If your system recognizes the LPSYSTEM command, you do not need to install the dedicated utility, Kyo-
ceramita's host-side software. Another option is the admintool if your system supports it.
• LPSYSTEM Installation
The following procedure must be executed from the Bourne Shell.
Type: SH then press Enter to enter the Bourne Shell program.
Use the following procedures to install LPSYSTEM:
1.
lpsystem -t bsd < Print server host name in /etc/hosts file >
2.
lpadmin -p <local printername> -s <remote host name or IP address>
!PORT1
Your system may want its IP address instead of the remote host name.
3.
Enable <local printername>
4.
Accept <local printername>
Printing on Linux
1.
Start x terminal.
2.
At the command prompt, enter the printtool command.
The Red Hat Print System Manager window opens.
3.
Click the Add button.
The Add Printer Entry window opens.
4.
Choose Remote Unix (lpd) Queue and click OK .
The Edit Remote Unix Queue Entry window opens.
5.
Specify the following:
• The printer name
• The spooler directory (typically, /usr/spool/lpd/prntr-name)
• The IP address of the Network Interface Card (in the Remote Host field)
• PORT1 (in In the Remote Queue field)
• An input filter (optional)
• When you finish, click OK.
6.
Restart the daemon by choosing lpd -> Restart lpd in the Print Server
Manager.
Chapter 24 UNIX Configuration
580