Kyocera KM-8530 User Manual page 181

To set the Finisher (Continued)
●
Operating procedures of
1.
Open [Device Options] tab of the [Properties] window from the [Print-
ers] window.
When displayed from the [Printers] window with Windows 98.
For Windows NT4.0 / 2000/XP, the [Device Settings] tab of the [Properties] window is displayed from the [Printers]
window.
2.
Select [Finisher] from the [Installable options] field.
The default is [No Finisher]. When [No Finisher] is selected, it is not possible to set an Finisher tray.
3.
Click the [▼] button beside the [Installable options] - [Change setting
for] boxes to display the list. Then select a finisher you want to use
from the list.
When the copier is provided with an optional Finisher, select either [DF-630] or [DF-635].
•
When you do not know if the optional Finisher installed is a [DF-630] or [DF-635], consult your system adminis-
trator.
4.
Click the [OK] button to close the [Properties] window.
Adobe PS3
181
Chapter 5 Printing from Windows