To set the Punch Unit (Continued)
●
Operating procedures of
1.
Open [Setup] tab of [Properties] window from the [Printers] window.
When displayed from the [Printers] window with Windows 98.
2.
Select a [Punch Unit] you want to use from the list in the [Available
options] box.
When the copier is provided with an optional punch unit, select either [PU-108 Punch Unit] or [PZ-108
Punch Unit].
•
When nothing is selected, it is not possible to set the [Punch] and [Z-folding] functions.
•
When you do not know whether the optional punch unit installed is a [PU-108 Punch Unit] or [PZ-108 Punch
Unit], consult your system administrator.
3.
Click the [OK] button to close the [Properties] window.
PCL5e
239
Chapter 5 Printing from Windows