Kyocera KM-8530 User Manual page 576

UNIX Printing through TCP/IP (Continued)
Setting Up an HP-UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to the network interface card using the lpd of the net-
work interface card. To do this:
1.
At the prompt, type:
sam
2.
When a window appears, select [Printer/Plotter Manager].
3.
When the menu appears, select [List printer and plotters].
4.
When a list appears, select [Actions] in the title bar.
5.
From the pull-down menu, select [Add Remote Printer].
6.
When a window appears, add values to configure the network interface
card.
See example below.
Data Requested
Printer Name
Remote System Name
Remote printer Name
7.
At the bottom of the screen, select [Remote Printer is on BSD system]
from the three choices available.
8.
Click on the OK button.
9.
Ping the unit to test communications. Type:
ping <IP address of the network interface card>
10.
Ping should confirm your IP address with the message:
<IP address of the network interface card> is alive
11.
If the connection is confirmed, you can now print.
Example Description of Input Data
myprinter name to be used in lp command
fastprint Network Interface Card hostname as in
/etc/hosts
PORT1 lpd queue name
576
Chapter 24 UNIX Configuration