Kyocera KM-8530 User Manual page 480

Confirming the Status of a Print Job (Continued)
●
Contents of the [Job Status] Screen
Contents of the [Job Status] screen are as follows:
Item
NO. Displays the No. (1-99) for each job (print/copy/scan) assigned to the copier.
MODE Displays the current operation mode of the printing system:
COPIER
PRINTER
SCANNER / SERVER
STATUS READY
ERROR
PRINTING
RESERVE
NO PAPER
STOP
JAM
INTERRUPT
TOTAL Displays the number of print originals for each job. (0 - 9999)
PAGE(s)
PAGE(s) TO Displays the remaining print count of the job. 0 to 9999 (The number exceeding 9999
GO
will be displayed as 9999 .)
MINUTE(s) Displays the time (in minutes) required for completing the job.
TO GO 1 to 999
Exceeding 999 minutes:999
Shorter than 1 minute:<1
Other The following message will be displayed on the bar when the reserved job does not exist.
RESERVED JOB DOES NOT EXIST
Contents
Current mode is the Copier mode
Current mode is the Printer mode
Current mode is the Scanner/Server mode
Ready to use in each mode
Error in each mode
Output in each mode
Ready to reserve
No paper in paper tray in Copy/Print mode
Stop in each mode
Jam in each mode
Interrupting the previous job
480
Chapter 15 Control Panel