Scanner Basic Screen - Kyocera KM-8530 User Manual

Scanner Basic screen

You can configure the following settings on the [Scanner Setting Basic] screen.
[Scanner Setting Basic] screen
●
[FILE NAME]
Touch this key when you need to change or enter scanned data file names.
Touching this key opens the [File Name Input] screen.
Any file name can be up to 26 alphanumeric characters long.
Depending on the file format, the extension ".tif" or ".pdf" is automatically added to the end of a file name.
●
[ADDRESS]
Touch this key to go back to the [Transmission Address Input] screen.
●
[FILE FORM]
You can choose a scanned data file form from [TIFF] and [PDF].
• For Scan to HDD, the file format is fixed at [TIFF].
• You cannot change the file form in the process of sending multiple images together.
To send multiple images at one time, touch the [STORE] key.
(p.453)
Reference
●
SCAN MODE
Use this feature to determine whether the original document is Duplex or Simplex. If the RADF is not
mounted, [Duplex] cannot be selected.
●
SCAN DENSITY
Touch this key to select a read density. The default is the same as that in the copy mode.
You can change the read density in the process of scanning in Store mode.
Chapter 12 Scanner Operation
450