Default Setting; (7-1 )Setting Date And Time - Kyocera ECOSYS P5026cdw Service Manual

2RB/2RC/2RD/2RF/3R6
(7) Default Setting
Before using this machine, configure such settings as date and time, network configuration, and energy saving functions
as needed.
The default settings of the machine can be changed in System Menu.
With regard to the items which can set in the system menu, refer to the user manual of the machine unit
The default of administrator ID and administrator in the factory shipment is set as follows.
Administrator ID: 2600 or 2100
Administrator password: 2600 or 2100
(7-1) Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
Set the time difference from date, time and GMT of the region where the machine is used.
Before set date/time, make sure to set the time difference.
The correct time can be periodically set by obtaining the time from the network time server.
1 Display the screen.
1 [Menu] key > [A] [▼] key > [The whole devices] > [►] key > [A] [▼] key >
[Day and Time setting] > [►] key
2 Enter the administrator ID, select [OK] key.
Enter that ID is the number of one to sixteen digits.
Select [A] or [▼] key, and enter the numerical values.
If you select [◄] or [►] key, the entering position moves left and right.
3 Enter an administrator password, and select [OK] key.
Enter that a password is the number of 0(No setting) to sixteen digits.
Select [A] or [▼] key, and enter the numerical values.
If you select [◄] or [►] key, the entering position moves left and right.
After entering the ID and the password, the collation is carried out. In case of the wrong
administrator ID and password, " ID is different." or " Password is different." is displayed
and return in the entering screen. Enter the correct ID and password again.
2-12