Screen Fonts - Kyocera KM-8530 User Manual

Screen Fonts

Two types of screen fonts are contained in the User Software CD.
PostScript Type 1 font
TrueType font
The PostScript Type 1 font has the same design as the internal printer font. It is recommended to install this
font when desiring to match the monitor display with printed results in the case of printing when using the
printer font.
For a list of the types of fonts available, refer to "Appendix C Font List."
(p.604)
Reference
For details on the installation of screen fonts, refer to the ReadMe file in the Mac or Windows folder on the
"User Software CD."
The "User Software CD" includes two ReadMe files, one in the Mac folder, and the other in the Windows
folder. They are distinguished as follows:
ReadmeE.txt in the Windows folder
Readme(E) in the Mac folder
Screenfonts Installation procedure
A. How to install PostScript Type1 fonts under Windows 95/98/Me/NT 4.0
In order to use PostScript Type 1 fonts in Windows 95/98/Me/NT 4.0, you must first install Adobe Type
Manager (ATM), and then install the fonts through ATM. ATM version 4.0 or higher is required for Win-
dows 98/Me/NT and 3.02 or higher for Windows 95.
If ATM is not installed, you will need to install an ATM compliant to your OS using the "User Software
CD."
(p.617)
Reference
If ATM version is lower than which mentioned above, you must first uninstall the lower ATM, and then
install adequate ATM.
To Install Type1 fonts in Windows95/98 and NT 4.0 using ATM Light 4.1:
1.
Choose [Start] - [Programs] - [Adobe] - [Adobe Type Manager] - [Adobe
Type Manager 4.1].
2.
In ATM, click the [Font] tab.
613
Appendix C Font