Chapter 17 Print Job Control; Using The Forced Output Function - Kyocera KM-8530 User Manual

Chapter 17 Print Job Control

Using the Forced Output Function

You can use the forced output function from the control panel in this printing system.
●
Forced Output
When the tray runs out of preset size papers, or when the tray does not contain papers whose size meets
the demand from the printer driver, the printing system displays a message prompting the user to load addi-
tional papers.
The process by which the user selects a different size paper on the operation panel and lets printing con-
tinue is referred to as "Force Output."
●
Procedure
1.
2.
3.
4.
When you choose not to use Forced Output, delete the print job, and change the setting concerned on the applica-
tion, or set the requested size of papers in the tray.
(p.171)
Reference
Make sure that the LCD touch screen shows a message prompting the
user to load additional papers of proper size.
Touch the key of the desired size displayed in the paper sizes area.
Press the [START] button.
The printout is made on the selected size of papers.
Chapter 17 Print Job Control
505
Chapter
17