Scanning Screen Of The Control Panel - Kyocera KM-8530 User Manual

Scanning Screen of the Control Panel

The scanning functions are performed through the control panel of the copier. Here, screens used in the scan-
ning features are explained in relation to each other.
[Scanner/Server Basic] screen
[SCAN] key
Select Destinations/
Storage Locations
screen
[OK] key
[Scanner Setting Basic] screen
[START] button to perform scanning
To set and register destinations/storage locations, select [Email], [HDD] or [FTP] on the Select Destinations/
Storage Locations screeen, and touch the [MANUAL I/P ADDRESS] key.
After entering a destination, select the destination on the Select Destinations/Storage Locations screeen.
Specify the destination, and set an original on the copier. Then, set it in the [Scanner Settings Basic] screen. On
this screen, you can set the various settings of scanning. After making the setting, press the [START] button on
the copier. The original is scanned, and scanned data are stored/transmitted to the specified destination.
Chapter 10 Overview of the Scanning Features
[CANCEL] key
Email Destinations
Manual Input
Email
HDD
FTP
FTP Destinations
Manual Input
[ADDRESS] key
435
Email Subject Input
HDD Box No.
Manual Input
FTP Port Number
Input
File Name Input
Select Special Original
Select Application