Kyocera KM-8530 User Manual page 200

To set to print on both sides (Continued)
●
Operating procedures of
Limitation
[Duplex] cannot be set in the following cases:
• When [OHP] or [Tab sheet] is selected in [Paper] tab - [Media Type]
• When [Collate] is not available in [Paper] tab
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of the message and adjust the relationship with
other settings.
1.
Open [Paper] tab of [Properties] window.
When displayed from an application with Windows 98.
2.
Click the [▼] button beside the [Duplex] box to display the list. Then
select [Flip on long edge] or [Flip on short edge].
The default is [None].
3.
Click the [OK] button to close the [Properties] window.
PCL5e
200
Chapter 5 Printing from Windows