Kyocera KM-8530 User Manual page 231

To set a Thick Cover (Continued)
●
Operating procedures of
Limitation
[PI Tray (Front/Back)] cannot be set in the following cases:
• When [PI-108] is not available in [Device Options] tab
• When [OHP-Interleave(Blank)] or [OHP-Interleave(Print)] is selected in [Paper] tab - [Paper
type]
• When [Sub Tray] is selected in [Paper] tab - [Output bin]
If you attempt to make a setting corresponding to the incongruous combinations described that cannot be set on
the printer driver, a message will be displayed. Check the details of the message and adjust the relationship with
other settings.
1.
Open [Device Options] tab of [Properties] window.
When displayed from an application with Windows 98.
•
For Windows NT4.0, the [Advanced] tab is displayed.
•
For Windows 2000/ XP, the [Device Settings] tab is displayed.
2.
From the [Printer features] field, select [Pl-Tray (Front)] when setting a
front cover, and [Pl-Tray (Back)] when setting a back cover.
It is possible to set both the front cover and the back cover.
3.
Click the [▼] button beside the [Printer features] - [Change setting for]
box to display the list. Then select [ON] from the list.
Follow the same procedure whether setting a front cover or a back cover.
•
The default is [None].
4.
Click the [OK] button to close the [Properties] window.
Adobe PS3
231
Chapter 5 Printing from Windows