Ip Rip Policy Summary - 3Com 4007 Command Reference Manual

ip rip policy summary

Layer 2
Switching
Modules
Multilayer
Switching
Modules
Displays summary information about RIP routing policies on a Multilayer
Switching Module.
Valid Minimum Abbreviation
ip ri pol s
Important Considerations
Your module has one unified IP routing table. Route policies enable
you to control the flow of routing information between the network,
the protocols, and the unified routing table on your module.
Route policies are classified as follows:
Import policies import routing information from what RIP learns
from a router/neighbor to the unified routing table. (You can also
import routing information from Open Shortest Path First (OSPF).)
Export policies send information from the routing table to RIP and
RIP routers, which controls what is going out on the wire to the RIP
domain. (You can also export from the routing table to OSPF.)
The module tracks policies that you define in both RIP and OSPF, so
the indexes that are assigned to your policies may have gaps (for
example, if you have RIP policies 1 and 2 and OSPF policies 3-6, the
next policy that is available for RIP or OSPF is 7).
Fields in the IP RIP Policy Summary Display
Field Description
Action Action for the route — accept or reject
Index Index number of the policy
Protocol Protocol (for example, RIP)
Route Route affects the policy
Source Source router (all is from all routers)
Type Whether the policy is an import or export policy
Weight Administrative weight — 1 through 16
285