Ip Rip Policy Summary - 3Com SuperStack II 9300 Command Reference Manual

3com switch command reference guide

Hide thumbs Also See for SuperStack II 9300:

Table of Contents

ip rip policy summary

For CoreBuilder 9000: Applies to Layer 3 switching modules only.

Displays summary information about RIP routing policies.

Valid Minimum Abbreviation

Important Considerations

Your system has one unified IP routing table. Route policies enable you

to control the flow of routing information between the network, the

protocols, and the unified routing table on your system.

Route policies are classified as follows:

Import policies import routing information from what RIP learns

from a router/neighbor to the unified routing table. (You can also

import routing information from Open Shortest Path First (OSPF).)

Export policies send information from the routing table to RIP and

RIP routers, which controls what is going out on the wire to the RIP

domain. (You can also export from the routing table to OSPF.)

The system tracks policies that you define in both RIP and OSPF, so the

indexes that are assigned to your policies may have gaps (for example,

if you have RIP policies 1 and 2 and OSPF policies 3-6, the next policy

that is available for RIP or OSPF is 7).

Fields in the IP RIP Policy Summary Display

Action for the route — accept or reject

Index number of the policy

Protocol (for example, RIP)

Route affects the policy

Source router (all is from all routers)

Whether the policy is an import or export policy

Administrative weight — 1 through 16

ip rip policy summary