Omron 3G3MV-PDRT2 User Manual page 89

SYSDRIVE Inverter Settings
4-2-4 Frequency Reference Settings and Display Units
• Perform the following settings to specify units for data related to frequencies (speeds) used in
DeviceNet communications.
• The standard unit used with DeviceNet is r/min, so always set the number of motor poles.
Parameter Set value
No.
o1-03 0
1
2 to 39
40 to 39,999
0.01 Hz units
0.01% units (max. frequency is 100%)
r/min units (Set the number of motor poles.)
Specifies the value used to set and display the maximum fre-
quency.
@@@@@
Set a 4-digit value without the decimal point.
Set the position of the digit where the decimal
point is to be displayed starting from the
rightmost digit.
Example: To display the maximum frequency as "200.0" specify
"12000."
Contents
Chapter 4
Default
setting
0
4-9