Omron 3G3MV-PDRT2 User Manual page 102

Remote I/O Functions
9.Click the I/O Allocation (IN) Tab and display the Edit I/O Allocate Window.
In the Poll settings, set Block: 1 and Allocated: 3300 (user-set).
In the COS settings, set Block: 2 and Allocated: 3500 (user-set).
10.Set the I/O Allocation (OUT) settings in the same way.
Set Block: 1 and Allocated: 3200 (user-set).
11.Return to the General Tab Page and click the Download Button.
12.When the download has been completed, restart with the new settings.
Reference
• When Auto allocation as is registered is selected on the Master's General Tab Page, a message will
appear every time that connection path settings are changed. The message will indicate that the
present I/O allocation was cleared because the connection was changed. When making connection
path settings, clear the Auto allocation as is registered check box before registering the Slaves.
• When connection settings are changed, a warning mark may be displayed by the Inverter Slave's
icon. In this case, click the Get I/O Size from the Scan List Button on the I/O Information Tab Page
of the Inverter Slave's Property Window and edit the information so that the I/O information for the
Slave's icon matches the Master's scan list. (For details, refer to 7-1-3 Network Connection Precau-
tions.)
5-8
Chapter 5