Omron 3G3MV-PDRT2 User Manual page 284

Appendices
Name
Input 4 Status of terminal S5
(multi-function input 5)
Input 5 Status of terminal S6
(multi-function input 6)
Note 2. Instances 01 and 02 will be enabled when using the control I/O remote I/O function and the
following parameter settings have been made.
• 3G3MV:
Set a value of 18 (communications output) in parameters n057 and n058 (function selection for
multi-function outputs 1 and 2).
• 3G3RV/3G3FV:
Set a value of F (not used) in parameters H2-01 and H2-02 (function selection for the multi-function
contact output and multi-function output 1).
When these settings are made, the Inverter's control terminal outputs can be controlled from commu-
nications and those signals can be used as measurement start triggers.
10-26
3G3MV
Status of terminal S5 (multi-
function input 3 selection)
Status of terminal S6 (multi-
function input 4 selection)
Meaning
3G3RV
Status of terminal 5 (multi-
function contact input 3)
Status of terminal 6 (multi-
function contact input 4)
Chapter 10
3G3FV