Out Tab Page - Omron 3G3MV-PDRT2 User Manual

Configurator Settings

7-3-2 OUT Tab Page

Use the OUT Tab Page to make settings for multi-function outputs.
Item
No. The settings in the No. field are as follows:
00: Multi-function contact output, 01: Multi-function output 1, 02:
Multi-function output 2
I/O Comment Set a user-defined name for each terminal.
Detection Mode Set the detection mode to either Cumulative ON Time or Contact
Operations Counter.
Note: When the setting is made in the setting window, the setting
will be displayed in the Detection Mode field.
Value Set the monitor value (time or count).
Note: When the setting is made in the setting window, the setting
will be displayed in the Value field.
Fault Action Set the status of the output terminal when a communications error
occurs.
Note: When the setting is made in the setting window, the setting
will be displayed in the Fault Action field.
Double-click the selected field or click the Edit Button.
Details
Chapter 7
Reference
---
7-2-11 Connected Device
Comment
7-2-6 Cumulative ON Time
Monitor
7-2-7 Contact Operations
Monitor
---
7-49