Omron 3G3MV-PDRT2 User Manual page 128

Remote I/O Functions
Byte number
Wd n+1 Right- 2 Frequency reference, rightmost byte
most
Left- 3 Frequency reference, leftmost byte
most
Wd n+2 Right- 4 Torque reference/torque limit, rightmost byte
most
Left- 5 Torque reference/torque limit, leftmost byte
most
Wd n+3 Right- 6 Torque compensation bias, rightmost byte
most
Left- 7 Torque compensation bias, leftmost byte
most
● Inputs (Inverter to PLC)
Byte number
Wd m Right- 0 Fault
most
Left- 1 P
most lock/com
pletion
(See
note 4.)
Wd m+1 Right- 2 Output frequency monitor, rightmost byte
most
Left- 3 Output frequency monitor, leftmost byte
most
Wd m+2 Right- 4 Torque reference monitor, rightmost byte
most
Left- 5 Torque reference monitor, leftmost byte
most
Wd m+3 Right- 6 Output current monitor, rightmost byte
most
Left- 7 Output current monitor, leftmost byte
most
Wd m+4 Right- 0 Con-
most nected
compo-
nent
mainte-
nance
flag
Left- 1 Error flag Inverter detected fault code
most
Note 1. A shaded box indicates that the bit is not used.
Note 2. Control remote I/O inputs and outputs are paired. When using control remote I/O, be sure
to set them together.
Note 3. Control remote I/O objects do not conform to the AC/DC drive profile, but are specially set
for this product.
5-34
Bit 7 Bit 6 Bit 5
Bit 7 Bit 6 Bit 5
Alarm Inverter
(minor ready
fault)
Multi-
function
output 2
Opera- Warning
tion time torque
over flag detected
flag
Bit 4 Bit 3 Bit 2
Instance ID: 152 Decimal (98 Hex)
Bit 4 Bit 3 Bit 2
At refer- During During
ence reset reverse
input run
Multi- Multi- Local/re
function function mote
output 1 contact
output
Cooling Inverter Network
fan/elec- unit power
trolytic mainte- voltage
capaci- nance drop flag
tor main- flag
tenance
flag
Chapter 5
Bit 1 Bit 0
Bit 1 Bit 0
Zero During
speed run
UV Opera-
detected tion fault