Configurator Settings
Setting Method
■
Click the Current Trace Tab in the Maintenance Information Window and set each item.
Item
Trigger
Current Trace Sam-
pling Cycle
7-18
Setting range
Forward run command,
reverse run command, fre-
quency agreement, or
error
10 ms, 20 ms, 50 ms,
100 ms, or a value up to
100 s
Current Trace Tab
Page in the
Maintenance
Information Window
Details
Sets the signal for trace timing.
Note: The trace is performed by combining the trigger
setting with the Start Trigger, Middle Trigger, and End
Trigger Buttons.
Select the trace sampling cycle from the pull-down
menu.
Chapter 7