Configurator Settings
7-3-4 Operation Time Tab Page
The Operation Time Tab Page is used to make the settings for the operation time monitor function.
Item
No.
Refer to the following table. (For details, refer to 7-2-5 Operating Time Moni-
tor Function.)
Equipment Name
Set a user-defined name for each device.
Note: When the setting is made in the setting window, the setting will be dis-
played in the Equipment Name field.
Operation Time
Set the monitor value.
Note: When the setting is made in the setting window, the setting will be dis-
played in the Operation Time field.
Hold Status
Set whether to maintain the ON Unit status when the monitor value is
exceeded.
Note The following table shows the meanings of the values set in the No. field.
No.
00
Multi-function contact output: ON
01
Multi-function output 1: ON
02
Input 2: ON
03
Input 4: ON
04
Input 0: ON or Input 1: ON
or when a forward/reverse run command is sent
05
Input 0: ON or Input 1: ON
or when a forward/reverse run command is sent
Double-click the selected field or click the Edit Button.
Details
Chapter 7
Reference
7-2-5 Operating Time Monitor
Function
Input 4: ON
Input 5: ON
Input 3: ON
Input 5: ON
Input 4: ON
Input 5: ON
7-51