Omron 3G3MV-PDRT2 User Manual page 281

Appendices
Object Details
■
Instance Attribute
00 01 Object Software
Revision
01 65 General status
71 Present Unit
conduction time
72 Unit conduction
time monitor flag
73 Unit conduction
time monitor set-
ting
75 Lifetime data
write
7C Detail Info 1
7D Detail Info 2
Name Content
Indicates the class 95
software revision. The
revision value is increased
whenever there is a
change.
Status information
Present value of the Unit's
total ON time
Reports the result of the
comparison between the
Unit's time monitor value
and the present value.
Sets the Unit's conduction
time monitor value.
Saves the current status
of the Communications
Unit to EEPROM immedi-
ately. The same proce-
dure is automatically run
every 6 min.
Reads the Operating Time
Exceeded Flags.
First two bytes:
Number of bytes in the
rest of the array = 0001
Data byte:
Bit 0: Fan operating time
exceeded
Bit 1: Electrolytic capacitor
operating time exceeded
(The corresponding flag is
set to "1" when the operat-
ing time is exceeded.)
Reads the Warning
Torque Monitor Flags.
First two bytes:
Number of bytes in the
rest of the array = 0001
Data byte:
Bit 0: Warning torque dur-
ing acceleration/decelera-
tion
Bit 1: Warning torque dur-
ing frequency coincidence
(The corresponding flag is
set to "1" when the warn-
ing torque is detected.)
Setting range Default
--- 0001
--- ---
--- ---
--- ---
--- ---
--- ---
--- 0001 00
--- 0001 00
Chapter 10
Read Write Size
Yes No Word
Yes No Word
Yes No Word
Yes No Word
Yes Yes Word
Save No Word
Yes No Array
Yes No Array
10-23