Option Parameters - Omron 3G3MV-PDRT2 User Manual

Appendices
Con- Regis- Class 64 (hex)
stant ter num-
In-
ber
stance
(hex)
E4-03 0323 03
E4-04 0324 03
E4-05 0325 03
E4-06 0326 03
E4-07 0327 03
Note 1. Values in parentheses are for 400-V-class Inverters.
Note 2. The setting range is 10% to 200% of the Inverter's rated output current. The values for a 200-
V-class 0.4-kW Inverter are given above.
Note 3. When the control mode is changed, the Inverter will revert to default settings. (The V/f control
default settings are given above.)
Note 4. E1-13 will be the same value as E1-05 after autotuning.
Note 5. The upper setting limit will be 150.0 Hz when C6-01 is set to 0.
Note 6. The settings of E1-11 and E1-12 are ignored if set to 0.0.
Note 7. If multi-function input H1-@@ is set to 16 (motor 2), the default setting will depend upon the
Inverter capacity. The value for a 200-V-class 0.4-kW Inverter is given.
Note 8. Values in parentheses are for Asian model Inverters.
■

Option Parameters

Con- Regis- Class 64 (hex)
stant ter num-
In-
ber
stance
(hex)
F1-01 0380 03
F1-02 0381 03
F1-03 0382 03
F1-04 0383 03
F1-05 0384 03
F1-06 0385 03
F1-07 0386 03
F1-08 0387 03
F1-09 0388 03
F1-10 0389 03
F1-11 038A 03
10-58
Name
At-
tribute
23 Motor 2 no-load current
24 Motor 2 number of poles (number of
poles)
25 Motor 2 line-to-line resistance
26 Motor 2 leak inductance
27 Motor 2 rated capacity
Name
At-
tribute
80 PG constant
81 Operation selection at PG open circuit
(PGO)
82 Operation selection at overspeed (OS) 0 to 3
83 Operation selection at deviation
84 PG rotation
85 PG division rate (PG pulse monitor)
86 Integral value during accel/decel
enable/disable
87 Overspeed detection level
88 Overspeed detection delay time
89 Excessive speed deviation detection
level
8A Excessive speed deviation detection
delay time
Chapter 10
Setting Setting Default
range unit setting
0.00 to 0.01 A Depends
1.89 on
(See capacity.
note 7.)
2 to 48 1 pole 4
0.01 Ω
0.000 to Depends
65.000 on
capacity.
0.0 to 0.1% Depends
40.0 on
capacity.
0.40 to 0.01 kW Depends
650.00 on
capacity.
Setting Setting Default
range unit setting
0 to 1 1024
60000 (600)
(See
note.)
0 to 3 1 1
1 1
0 to 3 1 3
0, 1 1 0
0 to 132 1 1
0, 1 1 0
0 to 120 1% 115
0.0 to 2.0 0.1 s 1.0
0 to 50 1% 10
0.0 to 0.1 s 0.5
10.0
Write
during
opera-
tion
No
No
No
No
No
Write
during
opera-
tion
No
No
No
No
No
No
No
No
No
No
No