Setup and Wiring
Inverter Wiring
■
●
3G3RV/3G3PV/3G3FV Series
Keep the DeviceNet wiring separated from the main circuit wiring as much as possible. Do not wire
them together.
3G3RV/3G3PV Inverters of 5.5 kW or Less
3G3FV Inverters of 15 kW or Less
Remove the plastic knockout on the side of the Inverter. Remove the knockout with snips and wire
through this side hole.
3G3RV/3G3PV Inverters of 7.5 kW or More
3G3FV Inverters of 18.5 kW or More
• Route the DeviceNet communications line along the left side of the DeviceNet Communications
Card and wire it to the Card.
• Do not bundle the control wiring and main circuit wiring together.
3-14
DeviceNet
Communica-
tions Card
DeviceNet
communications
line wiring
Control wiring
Operator
Main circuit wiring
Chapter 3