G3Pv Register Numbers, Classes, Instances, And Attributes - Omron 3G3MV-PDRT2 User Manual

Appendices
10-6 3G3PV Register Numbers, Classes, Instances, and
Attributes
10-6-1 Inputting Control/Frequency (Read/Write)
Class 64 Register No.
In- At-
stance tribute
--- --- 0000
00 01 0001
00 02 0002
--- --- 0003 to 0005 Not used.
00 06 0006
00 07 0007
00 08 0008
00 09 0009
--- --- 000A to 000E Not used.
00 0F 000F
Note Set all unused bits to 0.
10-66
(Hex)
Reserved
Frequency reference
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bits 10 to 15 Not used.
Frequency reference (Set units using parameter o1-03.)
PID target value
Analog output 1 setting ( − 11 V/ − 726 Dec. to 11 V/726 Dec.)
Not used.
Multi-function contact output setting
Bit 0
Bit 1
Bits 2 to 5
Bit 6
Bit 7
Bits 8 to 15
Reference selection settings
Bit 0
Bit 1
Bits 2 to 15
Contents
Run/stop command
Reverse/stop command 1: Reverse 0: Stop
Multi-function input command 3
Multi-function input command 4
Multi-function input command 5
Multi-function input command 6
Multi-function input command 7
Not used.
External error
Error reset
Contact output (terminal M1-M2) 1: ON 0: OFF
Contact output (terminal M3-M4) 1: ON 0: OFF
Not used.
Set error contact (terminal MA-MC) output using bit 7.
Error contact (terminal MA-MC)
Not used.
Not used.
PID target value (register 0006H) 1: Enabled 0: Disabled
Not used.
Chapter 10
1: Run 0: Stop
1: Error (EFO)
1: Reset command
1: ON 0: OFF
1: ON 0: OFF