Graph Tab Page; Operating Time Monitor Function - Omron 3G3MV-PDRT2 User Manual

Configurator Settings
●

Graph Tab Page

The graph shown in this tab page consists of a vertical axis representing the current level shown in
the History Tab Page, and a horizontal axis representing the time.
Note Other setting items and button functions in this tab page are the same as in the History Tab
Page.

7-2-5 Operating Time Monitor Function

Functions
■
• This function can perform a high-speed calculation in the Slave (independent of the ladder pro-
gram) to determine the time required for an input to go ON after a particular signal or reference
goes ON.
• By setting the monitor value, the operating time of the devices connected to the Inverter (motor and
peripheral devices) can be monitored.
• The Operation Time Over Flag in the Unit's Status Area turns ON when the operating time exceeds
the monitor value.
Current Trace Tab Page and
Graph Tab Page in the
Maintenance Information
Window
Chapter 7
7-21