Omron 3G3MV-PDRT2 User Manual page 214

Configurator Settings
Item
Unit Sta- Unit Maintenance
tus Report
Area
Fan Maintenance
Electrolytic Capac-
itor Maintenance
Network Power
Voltage Drop
Operation Time
Over
Connected Com-
ponent Mainte-
nance
Warning
During Forward
Run/During
Reverse Run
Frequency Agree
Update Button
Save Maintenance Counter
Button
Note The maintenance information is saved in the EEPROM approximately every six minutes.
Therefore, depending on the power OFF timing, up to six minutes worth of data is lost. To mon-
itor more closely, click the Save Maintenance Counter Button immediately before turning OFF
the power. The maintenance information will be written to the EEPROM.
7-64
Details
Notifies that the Inverter's operation time has
exceeded the monitor value.
Notifies that the fan's operation time has
exceeded the monitor value.
Notifies that the electrolytic capacitor's opera-
tion time has exceeded the monitor value.
Notifies that the network power voltage has
dropped below the monitor value.
Notifies that the operation time has exceeded
the monitor value.
Notifies that the total ON time or contact opera-
tions count for the I/O terminals has exceeded
the monitor value.
Notifies that a warning or error has occurred in
the Inverter (the details are also displayed).
Notifies that the Inverter is operating in forward/
reverse run mode.
Notifies that the Inverter is agreement frequen-
cies.
Uploads all the maintenance information
(including information from other tab pages)
and refreshes the screen.
Writes the maintenance counter information
(operating time and maintenance counter for
each terminal) to the EEPROM of the
DeviceNet Communications Unit/Card.
Chapter 7
Reference
7-2-8 Conduction Time
Monitor
7-2-9 Network Power Sup-
ply Voltage Monitor
7-2-5 Operating Time Mon-
itor Function
7-2-6 Cumulative ON Time
Monitor
7-2-7 Contact Operations
Monitor
---
---
---
---
---