Omron 3G3MV-PDRT2 User Manual page 275

Appendices
DeviceNet error code
4210
5110
5120
5300
6320
7110
7112
7301
7310
7500
9000
10-2-10AC/DC Drive Objects: Class 2A Hex
AC/DC drive objects are assigned to command-related functions for drive devices such as Inverters
and Servomotors. Command-related data reading and writing, monitor data reading, set data scale
changes, and so on, are all enabled. These functions are shared with similar functions used for
remote I/O, so even if they have been set for message operations they may get rewritten for remote I/
O.
Support Service Code
■
Service code number (hex)
0E
10
Object Details
■
Instance Attribute
00 01 Object Software
Revision
01 03 At Reference
04 Net Reference
(See note 1.)
Operator display
OH1 Overheat
UV2 Control power supply fault
PUF Fuse open
OPR Operator disconnection
ERR EEPROM write failure
RR Braking transistor failure
RH Braking resistor overheating
PGO PG is disconnected
OS Overspeed
DEV Speed deviation
BUS Communications error
EF3 External fault (Terminal 3)
EF4 External fault (Terminal 4)
EF5 External fault (Terminal 5)
EF6 External fault (Terminal 6)
EF7 External fault (Terminal 7)
EF8 External fault (Terminal 8)
FF0 Communications external fault
Service
Get attribute single
Set attribute single
Name Content
Indicates class 2A software
revisions. The revision
value is advanced when-
ever there is a change.
00: Stopped, accelerating
or decelerating
01: At reference
00: Operate with setting in
n004/b1-01.
01: Force DeviceNet opera-
tion (not valid in 3G3FV).
Meaning
Setting range Default
--- 0001
--- 00
00, 01 00
Chapter 10
Read Write Size
Yes No Word
Yes No Byte
Yes Yes Byte
10-17