Omron 3G3MV-PDRT2 User Manual page 200

Configurator Settings
7-3-3 IN Tab Page
Use the IN Tab Page to make settings for input terminals.
Item
No. Refer to the following tables.
I/O Comment Set a user-defined name for each terminal.
Note: When the setting is made in the setting window, the setting will be dis-
played in the I/O Comment field.
Detection Mode Set the detection mode to either Cumulative ON Time or Contact Operations
Counter.
Note: When the setting is made in the setting window, the setting will be dis-
played in the Detection Mode field.
Value Set the monitor value (time or count).
Note: When the setting is made in the setting window, the setting will be dis-
played in the Value field.
Note The following tables show the meanings of the numerals set in the No. field.
No.
00 Multi-function input 1
01 Multi-function input 2
02 Multi-function input 3
03 Multi-function input 4
04 Multi-function input 5
05 Multi-function input 6
06 Multi-function input 7
07
7-50
Double-click the selected field or click the Edit Button.
3G3MV
Forward/stop
Reverse/stop
Multi-function input selection 1
Multi-function input selection 2
Multi-function input selection 3
Multi-function input selection 4
Multi-function input selection 5
Details
3G3RV/3G3PV
Forward/stop
Reverse/stop
Multi-function contact input 1
Multi-function contact input 2
Multi-function contact input 3
Multi-function contact input 4
Multi-function contact input 5
Multi-function contact input 6
Chapter 7
Reference
---
7-2-11 Connected Device Com-
ment
7-2-6 Cumulative ON Time Monitor
7-2-7 Contact Operations Monitor
3G3FV