The Companion 200 Administration Terminal - Nortel Meridian Companion Installation And Maintenance Manual

87 Programming the COMPANION 200

The COMPANION 200 Administration Terminal

Buttons
COMPANION 200 Installation and Maintenance Guide
People who receive portables can customize them. This information
is not included on the COMPANION 200 Programming Record.
The COMPANION 200 can be programmed using an
Administration Terminal. The Administration Terminal has a two-
line display and three types of buttons. You cannot make or receive
calls on the Administration Terminal. It is used only for system
programming and maintenance.
• ƒ: Press the feature button to enter a feature operation or
programming session on the Administration Terminal.
• ®: Press the release button to exit a feature operation or
programming session on the Administration Terminal.
• Display buttons: The Administration Terminal has three display
buttons directly beneath the display. During feature operation or
programming, these display buttons provide options relating to
the top line of text on the display. If an option is available, it is
labeled on the bottom line of the display directly above the
corresponding button. Display buttons are represented in this
guide by underlined words in a special typeface (for example,
OK).
• Dialpad buttons: Use the buttons on the dialpad of the
Administration Terminal to enter feature codes and to select
digits when you are required to enter a value. You can enter letters
as well as the digits represented on the dialpad buttons when
programming some features (for example, System LID).
• Navigation buttons: The Administration Terminal has four
navigation buttons immediately below the display buttons. These
navigation buttons are used to move through the various feature
options and programming settings. An arrow (ª or º) appears
in the window beside the navigation button when it is enabled.
The navigation buttons are arranged as follows:
up a level
% ª º ^
back
& ª º *
• If the navigation buttons on your Administration Terminal do not
correspond to the above arrangement, remove the button caps and
replace them on the correct buttons. The buttons below the
navigation buttons are not used and have been disabled.
down a level
next
P0725810 Issue 3.0