Verifying A Radio's Antenna Setting - Nortel Meridian Companion Installation And Maintenance Manual

Verifying a radio's antenna setting

P0725810 Issue 3.0
8. Press % four times to continue in Configuration
programming.
1. Enter Configuration programming.
2. Press * or & until the display shows
3. Radio Data.
3. Press ^. The display shows Re-Evaluation.
4. Press *. The display shows Radios.
5. Press ^. The display shows Show radio:_.
6. Enter the five-digit radio number you wish to verify. The display
shows Cell Assignment.
7. Press *. The display shows Antenna Type.
8. Press ^. The display shows the radio number (nnnnn)
followed by either internal or external, depending on the
current setting.
9. Press * to verify the antenna setting of the next radio,
or & to verify the antenna setting of the previous radio.
10. Press ® when you are done.
COMPANION 200 Installation and Maintenance Guide
Verifying the installation 110