Nortel Meridian Companion Installation And Maintenance Manual page 52

53 Installing the hardware
COMPANION 200 Installation and Maintenance Guide
Figure 20: RPI mounting holes
28 mm
Figure 21: Opening the RPI cover
4. Hang the RPI on the two keyhole screws and tighten them.
5. Install the remaining two screws.
6. Feed in the power cord through the bottom of the RPI and route
it through the clip and around the strain relief support as shown
in the RPI components illustration in the following illustration.
7. Route the power cord to the input power socket just to the left of
PSU 1. Connect the plug to the socket.
328 mm
Keyholes
58 mm
305 mm
P0725810 Issue 3.0