33 Installing the hardware
Summary
Mounting the Controller
COMPANION 200 Installation and Maintenance Guide
Figure 5: The Controller
Expansion Cartridges
Software Cartridge
Power-on light
Power Supply
Cartridge
Power cord
1. Mount the Controller.
2. Install the Software Cartridge.
3. Install the Line Cartridge(s).
4. If needed, install the Expansion Cartridge(s).
Check that the requirements for the environment and for the power
source are met (see the Technical Specifications section for
specifications).
RJ21connector latches
Line Cartridges
First TCM
RJ21 connector
(ports 101–124)
Second TCM
RJ21 connector
(ports 125–132)
Access line
RJ21 connector
(ports 201–208)
Slot numbers
Slots for fiber
cable spools
Integrated
cable trough
P0725810 Issue 3.0