Installing An Indoor Omni-Directional External Antenna - Nortel Meridian Companion Installation And Maintenance Manual

79 Installing the hardware

Installing an indoor omni-directional external antenna

COMPANION 200 Installation and Maintenance Guide
When installing an indoor omni-directional external antenna:
• Use the bracket supplied to mount the antenna on a wall or
ceiling.
Note: Use of a bracket other than the one supplied may not provide
the necessary clearance between the floor or wall and the
antenna.
• Install the bracket so that the external antenna is vertical. The
recommended mounting height on a wall is halfway between the
floor and the ceiling.
Figure 37: Installing an indoor omni-directional external antenna
30 mm
Co-axial
cable
Ceiling mount
installation
1. Insert the antenna in the bracket so that the antenna is vertical.
2. Mount the bracket to the wall or ceiling using two screws.
Cable
clamp
Wall mount
installation
Co-axial
cable
Cable
clamp
30 mm
P0725810 Issue 3.0