Nortel Meridian Companion Installation And Maintenance Manual page 101

P0725810 Issue 3.0
3. To set the time, press CHANGE. The display shows Hour:
followed by the current set hour (00 if none scheduled). If you
don't want to change the time, go to step 4.
a. Press CHANGE. The display shows Hour: _. If you don't want
to change the hour, go to step c.
b. Enter the hour in 12-hour or 24-hour format, as one or two
digits.
c. Press *. The display shows Minutes: followed by
the current set minutes (01 if none scheduled). If you don't
want to change the minutes, go to step f.
d. Press CHANGE. The display shows Minutes: _.
e. Enter the minutes as one or two digits.
f. Press *. If you entered an hour less than or equal to
12, the display prompts you with AM or PM. If you entered an
hour greater than 12, go to step 4.
g. Press CHANGE to select AM or PM.
4. To set the date, press *. The display shows Date,
followed by the current set date (today's date if none scheduled).
If you don't want to change the date, press % four times
to continue in Administration.
a. Press CHANGE. The display shows Year:, followed by the
current set year. If you don't want to change the year, go to
step d.
b. Press CHANGE The display shows Year: _.
c. Enter the last two digits of the year.
d. Press *. The display shows Month:, followed by
the current set month. If you don't want to change the month,
go to step g.
e. Press CHANGE. The display shows Month: _.
f. Enter the month as one or two digits between 1 and 12.
g. Press *. The display shows Day:, followed by the
current set day. If you don't want to change the day, go to
step 5.
h. Press CHANGE. The display shows Day: _.
i. Enter the day of the month as one or two digits between 1 and
31.
5. Press % five times to continue in Administration.
COMPANION 200 Installation and Maintenance Guide
Programming the COMPANION 200 102