Nortel Meridian Companion Installation And Maintenance Manual page 118

119 Maintenance
Table 13: State of modules
Display:
3 devices busy
DISABLE
2 ports busy
DISABLE
4 lines busy
DISABLE
Disabling...
Enabling...
Waiting for idle
DISABLE
Unequipped
DISABLE
Disabled by user
ENABLE
Disabled by sys.
ENABLE
Updating state..
COMPANION 200 Installation and Maintenance Guide
6. Press * to view the next module, or % twice
to continue in Maintenance.
Meaning:
There are three devices in use that are connected to the module.
OK
There are two ports in use that are connected to the module.
OK
There are four lines in use that are connected to the module.
OK
The module is being disabled.
OK
The module is being enabled.
OK
The module will be disabled as soon as it becomes idle.
OK
There is no module connected to this port.
OK
The module has been disabled from a Maintenance session.
OK
The module has been disabled by the system.
OK
The state of the device is being updated.
P0725810 Issue 3.0